South Salt Lake Foundation Pros logoSouth Salt Lake Foundation ProsFoundation Repair · South Salt Lake, UT
Menu
sidewalk lifting in South Salt Lake, UT

South Salt Lake Foundation Pros

Sidewalk Lifting in South Salt Lake, UT

Sidewalk Lifting in South Salt Lake levels trip-hazard slabs with polyurethane foam injection, dime-sized holes, free estimates available.

Serving South Salt Lake and nearby communities.

A sidewalk slab that's jutted up an inch at the joint is a liability waiting to happen, and in South Salt Lake's older inner-ring blocks, tree roots and decades of freeze-thaw cycling have knocked plenty of walkways out of alignment. South Salt Lake Foundation Pros lifts sunken or tilted sidewalk panels back to grade with polyurethane foam injection instead of tearing out and repouring concrete.

The foam cures fast, adds almost no weight to the soil underneath, and matches panel height to the slabs on either side so the walkway reads level again. Most jobs are done and walkable the same day.

What's included

What's Included with Sidewalk Lifting

Typically included

  • Inspection of each panel for height difference, cracking, and slope toward the home
  • Drilling dime-sized access holes and injecting polyurethane foam to raise the slab
  • Patching access holes to match the surrounding concrete

Optional

  • Joint resealing between panels after lifting
  • Minor concrete patch work on chipped edges

Customer prep

  • Clear the walkway of planters, furniture, or debris before the crew arrives
  • Keep pets and kids off the work area until foam has cured

How it works

How Our Sidewalk Lifting Process Works

  1. Sidewalk Inspection photo
    Step 1

    Sidewalk Inspection

    Trip hazards and uneven slabs are identified along the walkway.

  2. Access Hole Drilling photo
    Step 2

    Access Hole Drilling

    Small entry points are drilled into the affected slab sections.

  3. Foam Injection photo
    Step 3

    Foam Injection

    Material is injected to raise the sidewalk to a safe level.

  4. Height Matching photo
    Step 4

    Height Matching

    Adjacent slabs are aligned to eliminate tripping hazards.

  5. Hole Patching photo
    Step 5

    Hole Patching

    Access points are sealed to restore a smooth surface.

  6. Final Safety Check photo
    Step 6

    Final Safety Check

    The sidewalk is reviewed to confirm proper alignment and safety.

Materials

Materials and Methods for Sidewalk Lifting

Most South Salt Lake sidewalk settlement comes from compacted base soil shifting under decades of freeze-thaw, not a structural foundation issue, so the fix stays on the surface.

  • Polyurethane Foam photo

    Polyurethane Foam

    Raises sidewalk slabs quickly with minimal curing time, which matters when a walkway can't stay roped off for days.

  • Patch Mix photo

    Patch Mix

    Fills access holes to restore a flush surface finish that blends with older poured concrete.

  • Joint Sealant photo

    Joint Sealant

    Reseals joints between slabs after lifting, keeping water out of the gap through winter freeze cycles.

  • Surface Protectant photo

    Surface Protectant

    Helps guard repaired areas from weather exposure and de-icing salt common in Salt Lake Valley winters.

  • Alignment Gauge photo

    Alignment Gauge

    Used to measure slab height differences during the process so adjacent panels end up flush.

  • Bonding Primer photo

    Bonding Primer

    Improves patch material adhesion to original concrete so the repair doesn't chip loose.

Timeline

How long does sidewalk lifting take?

A typical sidewalk lift is a single visit, not a multi-day project.

  1. 01

    Inspection and marking

    same day
  2. 02

    Drilling and foam injection

    1–2 hours

    per panel

  3. 03

    Hole patching and cure

    same day

    walkable within hours

Need a schedule that fits?

Get a Free Estimate

Before & after

Before and After Sidewalk Lifting Results

  • sidewalk lifting in South Salt Lake, UT
    Before
  • sidewalk lifting in South Salt Lake, UT
    After

FAQs

Sidewalk Lifting FAQs

How much does sidewalk lifting cost in South Salt Lake?

Most single-panel lifts run a few hundred dollars, with multi-panel jobs priced per slab. Call for a free estimate based on panel count and lift height needed.

Is sidewalk lifting faster than replacing the slab?

Yes. Foam injection is typically done in a few hours per panel versus days for demolition, forming, and curing a new pour.

Do I need a permit to lift a sidewalk?

If the sidewalk sits in a public right-of-way, South Salt Lake may require a permit or notification. Private walkways on your property usually don't. We confirm this before work starts.

Will the foam hold up through winter freeze-thaw?

Polyurethane foam is hydrophobic and doesn't break down from moisture or freeze cycles the way loose fill under an old slab does.

Can I lift a sidewalk myself?

DIY mudjacking kits exist but rarely match slab height accurately and can crack the panel further. Professional foam injection gives controlled, even lift.

What causes a sidewalk slab to sink in the first place?

Soil settlement, erosion, tree root growth, and freeze-thaw cycles under the slab are the most common causes locally.

Next step

Get a Sidewalk Lifting Estimate in South Salt Lake

Trip hazard on your walkway? Call South Salt Lake Foundation Pros at (435) 432-0635 or request a free estimate and we'll get it leveled before someone gets hurt.

Ask about Sidewalk Lifting

Tell us about the project and how to reach you.

Call (435) 432-0635