South Salt Lake Foundation Pros logoSouth Salt Lake Foundation ProsFoundation Repair · South Salt Lake, UT
Menu
piering and underpinning in South Salt Lake, UT

South Salt Lake Foundation Pros

Piering and Underpinning in South Salt Lake, UT

Piering and Underpinning in South Salt Lake stabilizes settling foundations with steel push piers or helical piers. Free estimates available.

Serving South Salt Lake and nearby communities.

When a foundation has settled past the point where crack injection fixes it, piering and underpinning is the structural answer. South Salt Lake's mid-century housing stock sits on Lake Bonneville sediment, soil that expands and contracts with moisture, which over decades can move a footing enough to need deep support instead of a surface patch.

South Salt Lake Foundation Pros installs steel push piers or helical piers driven to stable soil or bedrock, then transfers the structure's load onto those piers to stop further settlement and, in many cases, lift the foundation back toward its original position.

What's included

What's Included with Piering and Underpinning

Typically included

  • Load assessment and pier spacing plan based on the foundation's weight distribution
  • Pier driving to load-bearing depth and bracket installation for load transfer
  • Hydraulic leveling adjustment and site restoration after backfill

Optional

  • Interior finish repair (drywall, flooring) disturbed by access points
  • Combined wall stabilization if bowing is also present

Customer prep

  • Clear interior access points along the affected foundation wall
  • Move landscaping or items near the exterior excavation zone

How it works

How Our Piering and Underpinning Process Works

  1. Load Assessment photo
    Step 1

    Load Assessment

    The structure's weight distribution is analyzed to determine pier placement.

  2. Access Excavation photo
    Step 2

    Access Excavation

    Small excavation points are created along the foundation perimeter.

  3. Pier Driving photo
    Step 3

    Pier Driving

    Piers are driven or screwed into the ground until reaching stable strata.

  4. Load Transfer photo
    Step 4

    Load Transfer

    Brackets connect the piers to the foundation to redistribute structural weight.

  5. Leveling Adjustment photo
    Step 5

    Leveling Adjustment

    Hydraulic equipment carefully raises the foundation to its intended position.

  6. Site Restoration photo
    Step 6

    Site Restoration

    Excavated areas are backfilled and compacted to match the original grade.

Materials

Materials and Methods for Piering and Underpinning

South Salt Lake's variable valley soils mean pier depth isn't a guess, it depends on where stable strata actually sits under a given lot.

  • Steel Push Piers photo

    Steel Push Piers

    Deliver deep, reliable support for heavier structural loads by driving to bedrock or dense soil layers below the Bonneville sediment.

  • Helical Piers photo

    Helical Piers

    Provide torque-driven support suitable for the variable soil conditions common across South Salt Lake's older lots.

  • Underpinning Brackets photo

    Underpinning Brackets

    Connect piers securely to existing foundation footings so load transfers without stressing the original concrete.

  • Hydraulic Lift Systems photo

    Hydraulic Lift Systems

    Used to achieve controlled and precise foundation elevation changes without over-correcting.

  • Galvanized Coatings photo

    Galvanized Coatings

    Protect steel components from corrosion over time, important given spring snowmelt moisture in the ground.

  • Compacted Fill Material photo

    Compacted Fill Material

    Used to stabilize soil around newly installed piers so settling doesn't recur at the access points.

Timeline

How long does piering and underpinning take?

Most residential piering jobs are measured in days, not weeks, though pier count drives the schedule.

  1. 01

    Consult and load assessment

    same day
  2. 02

    Permit filing

    1–2 weeks
  3. 03

    Pier installation

    1–3 days

    depending on pier count

  4. 04

    Leveling and site restoration

    1 day

Need a schedule that fits?

Get a Free Estimate

Before & after

Before and After Piering and Underpinning Results

  • piering and underpinning in South Salt Lake, UT
    Before
  • piering and underpinning in South Salt Lake, UT
    After

FAQs

Piering and Underpinning FAQs

What's the difference between piering and underpinning?

Piering refers to the support posts (push piers or helical piers) driven into the ground. Underpinning is the broader process of connecting those piers to the existing foundation to transfer and stabilize the structural load.

How much does piering and underpinning cost in South Salt Lake?

Cost scales with the number of piers needed, typically ranging from a few thousand dollars for a localized repair to well over $15,000 for a full perimeter underpinning job. We quote after assessing the settlement.

How long does foundation pier installation take?

Most jobs run 1-3 days of actual pier driving once permits clear, depending on how many piers the foundation needs.

Do I need a permit for piering work?

Yes. Structural piering and underpinning on a load-bearing foundation almost always requires a permit in South Salt Lake. We handle that filing.

Can I install foundation piers myself?

No. Piering requires engineering judgment on pier spacing, depth, and load transfer that isn't a DIY task, and most jurisdictions require licensed installation.

Will piering stop my foundation from settling further?

Properly installed piers driven to stable soil or bedrock are designed to carry the structural load independent of the shifting surface soil above, which stops further settlement at that location.

Next step

Get a Piering and Underpinning Estimate in South Salt Lake

Seeing stair-step cracks or a settling corner? Call South Salt Lake Foundation Pros at (435) 432-0635 or request a free estimate to find out which pier system fits your home.

Ask about Piering and Underpinning

Tell us about the project and how to reach you.

Call (435) 432-0635