South Salt Lake Foundation Pros logoSouth Salt Lake Foundation ProsFoundation Repair · South Salt Lake, UT
Menu
concrete lifting in South Salt Lake, UT

South Salt Lake Foundation Pros

Concrete Lifting in South Salt Lake, UT

Concrete lifting in South Salt Lake using polyjacking foam to raise sunken slabs same-day, free estimates available.

Serving South Salt Lake and nearby communities.

A sunken slab near the garage or a tripping edge on the walkway usually means the soil under it settled, not the concrete itself failing. South Salt Lake Foundation Pros uses polyjacking, injecting hydrophobic polyurethane foam through dime-sized holes, to raise and support slabs without tearing them out.

South Salt Lake's older lots sit on Lake Bonneville sediment that shifts with seasonal moisture, which is why driveways, patios, and walkways here settle unevenly even when the home's main foundation is stable. Polyjacking addresses that soil movement directly instead of just patching the surface crack.

What's included

What's Included with Concrete Lifting

Typically included: slab assessment, access hole drilling, foam injection to target lift height, hole patching, and a level check before we leave.

Optional: joint re-sealing on adjacent slabs and a protective sealant topcoat for added moisture resistance.

Customer prep: clear vehicles, furniture, or planters off the slab area before the crew arrives.

How it works

How Our Concrete Lifting Process Works

  1. Surface Assessment photo
    Step 1

    Surface Assessment

    Uneven or sunken concrete areas are identified and measured.

  2. Drilling Access Holes photo
    Step 2

    Drilling Access Holes

    Small holes are drilled into the concrete to allow material injection.

  3. Material Injection photo
    Step 3

    Material Injection

    Expanding foam is injected beneath the slab to raise it evenly.

  4. Elevation Monitoring photo
    Step 4

    Elevation Monitoring

    Lift progress is measured to achieve the desired level.

  5. Hole Patching photo
    Step 5

    Hole Patching

    Access holes are filled and finished to match the surrounding surface.

  6. Final Inspection photo
    Step 6

    Final Inspection

    The lifted area is reviewed for levelness and stability.

Materials

Materials and Methods for Concrete Lifting

South Salt Lake's freeze-thaw winters make lightweight, water-resistant lifting material the right call over old-style mudjacking slurry, which absorbs moisture and re-settles.

  • Polyurethane Foam photo

    Polyurethane Foam

    Expands beneath slabs to lift and stabilize concrete surfaces without adding soil-compacting weight that could cause future settling.

  • Injection Ports photo

    Injection Ports

    Allow controlled placement of lifting material under the slab so the lift happens in small, measured stages instead of one uneven push.

  • Patch Compound photo

    Patch Compound

    Fills drilled access holes for a smooth finish that blends with the surrounding slab color and texture.

  • Surface Sealant photo

    Surface Sealant

    Protects the repaired area from moisture and staining, which matters given the valley's spring snowmelt runoff.

  • Leveling Gauge photo

    Leveling Gauge

    Used to measure and confirm slab elevation during lifting so adjoining panels match height.

  • Bonding Agent photo

    Bonding Agent

    Improves adhesion between new patch material and existing concrete for a repair that holds through another freeze-thaw cycle.

Timeline

How long does concrete lifting take?

Most concrete lifting jobs wrap up in a single visit, with the crew moving from assessment to a walkable surface before they leave.

  1. 01

    Consult and assessment

    same day
  2. 02

    Drilling and foam injection

    2–4 hours
  3. 03

    Patch cure and final check

    same day

    walkable within hours

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits and Codes for Concrete Lifting

Permit rules vary by jurisdiction. Confirm specifics with South Salt Lake city or Salt Lake County before scheduling work.

Typically needs a permitOften no permit
Lifting a slab tied into a public sidewalk or right-of-wayLifting a private driveway slab
—Lifting a backyard patio slab
—Repairing existing concrete without replacement or expansion

Cost

What does concrete lifting cost in South Salt Lake?

Cost depends mostly on slab size and how far it needs to rise, not a flat per-project rate. Request a free estimate and we'll walk the slab with you before quoting a number.

Project typeTypical rangeWhat’s included
Small slab section$300–$800single panel or small walkway segment.
Standard driveway or patio slab$800–$2,000one to several panels lifted and leveled.
Large multi-panel area$2,000–$4,500full driveway or extended patio surface.
Combined lift and drainage correction$2,500–$5,500lifting plus slope adjustment to redirect water away from the house.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

DIY vs pro

DIY vs Hiring a Pro for Concrete Lifting

DIYHire a pro
Filling small surface cracks with hardware-store caulk on concrete that isn't actually sinkingAny slab that has visibly dropped or created a trip hazard
Monitoring a slight slope for changes over a season before deciding to actDriveway or patio settling near the foundation where water is pooling against the house
—Situations where DIY mudjacking kits can't match the even, controlled lift that foam injection delivers

When to call

When to Call for Concrete Lifting

Call South Salt Lake Foundation Pros or request a free estimate to get a straight answer on whether lifting will fix it.

  • A slab edge has dropped enough to catch a toe or a mower blade
  • Water pools on the driveway or patio instead of draining away
  • Gaps have opened between slab sections or at the garage threshold
  • You're comparing lifting against full slab replacement and want the cheaper option explained

Before & after

Before and After Concrete Lifting

  • concrete lifting in South Salt Lake, UT
    Before
  • concrete lifting in South Salt Lake, UT
    After

FAQs

Concrete Lifting FAQs

Is polyurethane foam lifting better than mudjacking for my driveway?

Yes for most South Salt Lake driveways. Polyurethane foam weighs a fraction of traditional mudjacking slurry, cures within hours instead of days, and resists moisture absorption during freeze-thaw cycles, so it holds its lift longer.

How much does concrete lifting cost compared to replacement?

Lifting typically runs well below the cost of tearing out and pouring new concrete, often a fraction of replacement cost depending on slab size and access.

How long does concrete lifting take?

Most residential slabs are lifted, patched, and walkable within a single visit, often just a few hours from drilling to final check.

Do I need a permit for concrete lifting?

Most private driveway, patio, and walkway lifts don't require a permit. Sidewalks tied to a public right-of-way may need one, so check with the city first.

Is DIY concrete lifting a good idea?

DIY foam kits exist but rarely deliver an even lift across a full slab, and uneven injection can create new low spots. Professional equipment allows controlled, monitored lifting instead.

What causes a slab to sink in the first place?

Soil settlement beneath the slab, often from moisture changes in the valley's sediment soils, is the usual driver, not a defect in the concrete itself.

Will the lifted slab sink again?

Properly injected foam fills voids and supports the slab on more stable ground, which reduces the chance of repeat settling compared to the original unsupported soil.

Next step

Get a Concrete Lifting Estimate in South Salt Lake

Call (435) 432-0635 or request a free estimate and we'll look at the slab before quoting a price.

Ask about Concrete Lifting

Tell us about the project and how to reach you.

Call (435) 432-0635